QSC CABINA ACTIVA K10
Specifications
| K Series |  |
| SPECIFICATIONS | K10 |
|---|---|
| Configuration | Multipurpose 2-way |
| Transducers Low-frequency High-frequency | 10" cone transducer 1.75" diaphragm compression driver |
| Frequency Response (-6 dB) | 60 Hz - 18 kHz |
| Frequency Range (-10 dB) | 56 Hz - 20 kHz |
| Nominal Coverage (-6 dB) | 90° conical |
| Maximum SPL1 | 129 dB peak |
| Amplifiers | |
| Power Output2 | 1000 W continuous Class D (500 W LF, 500 W HF) 2000 W peak |
| Input Impedance (ohms) | XLR / ¼": 40k balanced / 20k unbalanced XLR / ¼" MIC mode: 2260 balanced RCA: 10k |
| Controls | Power, Gain A, Gain B, Mic/Line, LF Mode (Ext Sub/Norm/DEEP™), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit) |
| Indicators | Power, Signal A, Signal B, Standby, Limit, Mic |
| Connectors | Balanced female XLR/¼" line/mic level input, Balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out , Balanced male XLR "mix" out, Stereo RCA line level input, Remote gain control, Locking IEC power connector |
| Cooling | On demand, 50 mm variable speed fan |
| Amplifier Protection | Thermal limiting, output overcurrent, overtemperature muting, GuardRail™ |
| Transducer Protection | Thermal limiting, excursion limiting |
| AC Power Input | Universal power supply 100 - 240 VAC, 50 - 60 Hz |
| AC Power Consumption (1/8 Power) | 100 VAC, 2.3 A 120 VAC, 2.01 A 230 VAC, 1.13 A |
| Enclosure | |
| Material | Impact resistant ABS |
| Finish | Black paint |
| Grille | Black powder coated 18 gauge steel |
| Dimensions (HWD) | 20.4" x 12.6" x 11.8" 519 mm x 320 mm x 300 mm |
| Weight (Net) | 32 lb / 14.5 kg |
| Available Accessories | K10 TOTE, K10 YOKE, K SERIES M10 KIT |
2 Independent of limiters and driver protection circuits.
Enclosure Dimensions
All Specifications Subject to Change Without Notice.
