QSC CABINA ACTIVA KW 153
Cabina amplificada de 3 vías; Parl 15" + Corneta con medio de 6,5" + Driver con diafragma de 1,75"; Potencia de 1000W RMS en total (Amplificadores clase D). Rango de Frecuencia: 37 Hz - 20 kHz. Cobertura nominal: 75° simetria axial. SPL @ 1 mt: 134dB p
KW Series
Specifications
| KW Series |  |  |  | |||||||||||||||
| SPECIFICATIONS | KW122 | KW152 | KW153 | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Configuration | 12" 2-way multipurpose | 15" 2-way trapezoidal | 15" 3-way trapezoidal | |||||||||||||||
| Transducers Low-frequency Mid-frequency High-frequency | 12" cone transducer - 1.75" diaphragm compression driver | 15" cone transducer - 1.75" diaphragm compression driver | 15" cone transducer 6.5" mid range cone transducer 1.75" diaphragm compression driver | |||||||||||||||
| Frequency Response (-6 dB) | 53 Hz - 18 kHz | 47 Hz - 18 kHz | 35 Hz - 18 kHz | |||||||||||||||
| Frequency Range (-10 dB) | 50 Hz - 20 kHz | 44 Hz - 20 kHz | 33 Hz - 20 kHz | |||||||||||||||
| Nominal Coverage (-6 dB) | 75° axisymmetric | 60° axisymmetric | 75° axisymmetric | |||||||||||||||
| Maximum SPL1 | 131 dB peak | 133 dB peak | 134 dB peak | |||||||||||||||
| Amplifier | ||||||||||||||||||
| Power Output2 | 1000 W Class D (500 W LF, 500 W HF) continuous 2000 W peak | 1000 W Class D (500 W LF, 500 W MF/HF) continuous 2000 W peak | ||||||||||||||||
| Input Impedance (ohms) | Channel A XLR / ¼":
Channel B RCA: 10k | |||||||||||||||||
| Controls | Power, Gain A, Gain B, Channel A Input Gain (0 dB / 12 dB / 24 dB / 36 dB), LF Mode (Ext Sub/Norm/DEEP™), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit) | |||||||||||||||||
| Indicators | Power, Signal A, Signal B, Standby, Limit, Mic (24 dB and 36 dB settings) | |||||||||||||||||
| Connectors | Balanced female XLR/¼" line/mic level input, Balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out , Balanced male XLR "mix" out, Stereo RCA line level input, Remote gain control, Locking IEC power connector | |||||||||||||||||
| Cooling | On demand, 50 mm variable speed fan | |||||||||||||||||
| Amplifier Protection | Thermal limiting, output overcurrent, overtemperature muting, GuardRail™ | |||||||||||||||||
| Transducer Protection | Thermal limiting, excursion limiting | |||||||||||||||||
| AC Power Input | Universal power supply 100-240 VAC, 50 - 60 Hz | |||||||||||||||||
| AC Power Consumption (1/8 Power) | 100 VAC, 2.3 A 120 VAC, 2.01 A 230 VAC, 1.13 A | |||||||||||||||||
| Enclosure | ||||||||||||||||||
| Material | 15 mm painted birch plywood | |||||||||||||||||
| Finish | Black textured paint | |||||||||||||||||
| Grille | Black powder coated 16 gauge steel | |||||||||||||||||
| Dimensions (HWD) | 26" x 15" x 15.4" 660 mm x 381 mm x 391 mm | 32.1" x 17.5" x 15.2" 816 mm x 445 mm x 386 mm | 43.1" x 18.5" x 16.8" 1094 mm x 470 mm x 427 mm | |||||||||||||||
| Weight (Net) | 49 lb (22.2 kg) | 64 lb (29 kg) | 87 lb (39.5 kg) | |||||||||||||||
| Available Accessories | KW SUS KIT 122, KW122 COVER, KW M10 KIT | KW152 COVER, KW M10 KIT | KW153 COVER, KW M10 KIT | |||||||||||||||
| KW Series |  |
| SPECIFICATIONS | KW181 |
|---|---|
| Configuration | 18" subwoofer |
| Transducer | 18" cone transducer |
| Frequency Response (-6 dB) | 38 Hz - 124 Hz |
| Frequency Range (-10 dB) | 34 Hz - 143 Hz |
| Maximum SPL1 | 135 dB peak |
| Amplifiers | |
| Power Output2 | 1000 W Class D continuous 2000 W peak |
| Input Impedance (ohms) | XLR / ¼": 38k balanced / 19k unbalanced |
| Controls | Power, Gain, LF Mode (Normal/DEEP™), Polarity (Normal/Reverse), Front LED (On/Off/Limit) |
| Indicators | Power, Signal, Standby, Limit |
| Connectors | Dual balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out, Remote gain control, Locking IEC power connector |
| Cooling | On demand, 50 mm variable speed fan |
| Amplifier Protection | Thermal limiting, output overcurrent, overtemperature muting, GuardRail™ |
| Transducer Protection | Thermal limiting, excursion limiting |
| AC Power Input | Universal power supply 100 - 240 VAC, 50 - 60 Hz |
| AC Power Consumption (1/8 Power) | 100 VAC, 2.3 A 120 VAC, 2.01 A 230 VAC, 1.13 A |
| Enclosure | |
| Material | 15 mm painted birch plywood |
| Finish | Black textured paint |
| Grille | Rugged Powder-Coated Steel Grille |
| Dimensions (HWD) | 20.1" x 23.4" x 29.9" with casters 510 mm x 595 mm x 761 mm with casters |
| Weight (Net) | 88 lb (40 kg) |
| Available Accessories | KW181 COVER |
