POWERSOFT POTENCIA M50Q

Amplificador de potencia de 4 canales 

Con 5000 Watts a través de cuatro canales en un solo espacio de rack en un mero peso 7.4kg/16.3lbs, el M50Q es igualmente versátil en giras y bastidores instalados de forma permanente. Calidad de sonido legendaria derivado de las tecnologías patentadas de Powersoft, y la mayor eficiencia energética están haciendo el M50Q el líder en su clase. Optimizado para los sistemas de sonido de tamaño medio y las cargas de 4Ω, es un valor fantástico, prácticamente, así como en el comercio.

GENERAL
Number of channels	4
Output power	4 Ω	8 Ω	100V	70V	8 Ω bridged
EIAJ test standard, 1 kHz, 1% THD	4 x 1,250 W	4 x 750 W	4 x 1,250 W **	4 x 1,200 W	2,500 W per channel pair
Max. output voltage	135 V(peak)
Max. output current	65 A(peak)

AC MAINS POWER
Power supply	Universal, regulated switch mode
Operating voltage	100 V - 240 V (factory selection) ± 10%, 50 Hz - 60 Hz
Consumption / current draw		@ 230 V	@ 115 V
Idle	64 W	0.51 A	0.6 A
1/8 of max. output power @ 4 Ω*	905 W	5.8 A	11.6 A
1/4 of max. output power @ 4 Ω*	1,772 W	11.1 A	22.2 A

THERMAL
Environmental operating temperature	0-45° C / 32-113° F
Thermal dissipation	Fan, continuously variable speed, temperature controlled, front to rear airflow
Idle	55 kcal/hr	218 BTU/hr
1/8 of max. output power @ 4 Ω*	241kcal/hr	955 BTU/hr
1/4 of max. output power @ 4 Ω*	449 kcal/hr	1,781 BTU/hr

AUDIO
Gain	32dB, 30dB, 28dB, 26dB, 24dB, 22dB, 20dB, 18dB, 14dB, 4dB, -∞, user selectable
Input sensitivity @ 8 Ω	1.94 V / 7.97 dBu
Max input level	6 V / 17.8 dBu
Input impedance	10 kΩ
Frequency response	10 Hz - 30 kHz (1 W @ 8 Ω, ± 3 dB)
THD+N / SMPTE IMD	< 0.05% @ 1/2 of full power
DIM100 IMD	typ. <0.005% (<0.02% @ >0.1 W)
S/N ratio	>110 dBA (20 Hz - 20 kHz, A weighted)
Crosstalk separation	>70 dB @ 1 kHz
Slew rate	40 V/µs @ 8 Ω, input filter bypassed
Damping factor @ 8 Ω	>5000 @ 100 Hz

FRONT PANEL
Indicators	3 LEDs per channel: 2 x green, 1 x red 3 status LEDs: 1 x green, 1x white, 1 x yellow
Controls	1 stepped level attenuator pot per channel Mains switch
Maintenance	Dust filters foam behind front panel

REAR PANEL
Audio signal input connectors	4 x balanced Neutrik® XLR female
Loudspeakers output connectors	4 x Neutrik® Speakon NL4MD
AC mains	IEC C13 16A connector; AC mains cord with 3-pin plug 15A for US, IEC Schuko 16 A for every other nation
Controls	2 x link switch, linking analog inputs 1 & 2 and 2 & 4

CONSTRUCTION
Dimensions	W 483 mm / 19", H 44.5 mm / 1U, D 358 mm / 14.1"
Weight	7.3 kg / 16 lbs
Chassis	1 mm (0.04”) steel chassis and steel removable dust cover, 3 mm (0.12”) steel front panel, screw hole preotection, steel side reinforcement & rear support

M50Q DSP+ETH ADDITIONAL SPECIFICATIONS
Output power	4 Ω	8 Ω	100V	70V	8 Ω bridged
EIAJ test standard, 1 kHz, 1% THD	4 x 1,250 W	4 x 750 W	4 x 1,250 W ***	4 x 1,200 W ****	2,500 W per channel pair
REAR PANEL
Network data port Ethernet	1 x RJ45 with activity LED with 2 rotary address switches
DSP preset selection	2 x Pushbutton (stepping through bank of 4 presets) 2 x 4 LED preset indicators

DSP
A/D converter	Dual 24bit 24/48 kHz Tandem® architecture, dynamic range 118 dB(A) mono, 100 dB(A) stereo, THD <0.02% (20 Hz - 20 kHz)
D/A converter	Dual 24bit 24/48 kHz Tandem® architecture, 115 dB(A) dynamic range, THD <0.02% (20 Hz - 20 kHz)
Presets	Bank of 4 presets, management and upload via  Armonía Pro Audio Suite™
Delay for time alignment	<10 ms per output
Crossover filters	Butterworth, Linkwitz-Riley, Bessel, 6dB/oct to 48dB/oct
Output equalizer	Up to 9 fully parametric per channel: peaking, hi/lo shelving, hi/lo pass, band pass, band stop, all pass
Input equalizer	5 types (PEQ, shelving, band pass, band stop, all pass)
Limiters	Peak limiter, RMS limiter, frequency dependent RMS limiter